Updated February 13, 2023
Hughes Autoformers RV220-50SP Voltage Booster
- 50 amp- 12,000 Watts Capacity, 4,800 Joules of Advanced Surge Protection Built-in with indicator light
The Hughes RV220-50-SP is designed to protect sensitive electronic equipment installed in many motorhomes today. It can protect anything from complex computer system monitors to high-definition television screens. Created to work with 120 volt systems, the RV220-50-SP can help protect devices such as water pumps and air conditioners. Many of these devices are sensitive to unexpected electrical surges that can damage the equipment and render it unusable.
Every VR deserves to have one of the Best RV Autoformers. This is to protect the devices from damage due to low voltage. If you want to extend the life of your VR devices, you should hire the best VR auto-former on the market: Hughes Performance RV22050 Autoformer. There are so many things I love about this 30 amp autoformer. First of all, it is a weather resistant product. It can withstand rapid changes in humidity and heat inside the RV. This means that you can enjoy the device for a long time. It can last even decades.
This RV Autoformer creates a barrier between the RV and the utility pole by constantly monitoring power levels to stop power surges and spikes. When it detects a low voltage problem, it increases the power going into the RV. This allows you to maintain a stable power charge. On the heavy side, it weighs 35 pounds, but doesn’t take up much room. It also allows additional devices to work with your 30-amp connection, as you can increase the available power to run without needing more power from the RV park. It is a simple device to use. All you have to do is plug it into the RV park utility pole and then plug it into the unit. It also comes with a lock to keep it secure and a power cord long enough to reach the outlet when the device is resting on the floor.
One of those things that caught my eye was the design of the plugin. This ensures that using the device is an easy task that almost anyone could do. Simply connect the power cord to the utility pole of the RV park. You will also need to make sure you are connected to your platform. Sounds easy enough, right? Well, the product only gets more impressive with its built-in surge protector. This feature will ensure that both the amplifier and its rig are protected when a dangerous spike occurs. You will suffer the impact rather than the damage in the most critical parts of this process. You can also expect this surge protection to be adequate as it has a Joule rating of 4800. That should be more than enough to ensure that everything stays safe and intact.
If you still think having a surge suppressor would be enough to save your electronics and internal circuitry, well, you might have to think again. The RV220-50SP is one of the best RV auto-formators because it is not just an ordinary electricity amplifier. It has built-in surge protection designed for an all-in-one solution. The RV220-50SP has the same reliability and features as its predecessor; now comes with an advanced surge protection solution up to 4800J. You no longer need to purchase a surge suppressor separately. We can say that it is the only original, patented and market-leading RV power solution “all in one”. This is the Best RV Autoformer 2023.
Hughes Autoformers RV2130-SP Voltage Booster
- Fit type: Universal Fit
The Hughes Autoformer RV2130-SP Voltage Amplifier automatically increases voltage by 10% and has 30 amps. With 2400 joules of surge protection, your device will automatically increase by 10% when the voltage drops below 114. The surge and spike protection module is replaceable. So if there is a huge spike, you take the impact and make sure the thruster and your RV are not damaged.
This Hughes RV AutoFormer is easily among the best available today. It has many features that will help your rig devices get enough power, even in older campsites. A good example would be its built-in surge protection. This is a feature that will ensure that this device remains completely safe and efficient. In other words, it will help ensure that your equipment and devices are not damaged by a power surge. You must also like the simple installation process of this product. Many buyers find this simple and straightforward, thanks to the included manual. You shouldn’t have any installation problems in your rig’s electrical system. But the Hughes autoformer installation kit comes separately, which was a bummer.
As one of the only US patented surge units available, this RV Autoformer 30 amp unit is rated at 3600 watts. It also comes with a boost indicator light and full LED parking power diagnostics. Weighing in at just 21 pounds, it’s a lightweight unit that doesn’t take up much space. The RV2130-SP comes with a 4 ½ foot power cord and lock to prevent theft. Plus, you get a three-year limited warranty. And Hughes will give you a free replacement if the unit runs out in the first two years you own it.
The RV2130-SP 30A voltage amplifier with surge protection has a complete and real-time diagnosis of the light power supply. If the power supply drops below 113 volts it will rise to 123 volts and the line boost light will appear. It will continuously increase by 10% until the electrical potential reaches 90 volts, which is the minimum number of volts. Once the park’s electricity reaches 115 volts or more, the boost mode turns off. The package comes with a free anti-theft cable to prevent theft and is used to ensure that it is well connected to the power outlet. In case of damage or malfunction, the spike suppressor module is replaceable. During heavy rains, keep it covered or place it on a higher ground level. This item is weather resistant, not waterproof. It weighs only 21 pounds and is easy to store in the trailer compartment.
Additionally, you can purchase (optional) the Hughes Autoformer 30 A KIT internal installation kit. This is a mounting kit containing a 5 ft. 30A cord with male plug and a 30A female receptacle for the service cord. If you want to install the RV2130-SP in a ventilated space inside your trailer, this kit is an excellent purchase option. The RV2130-SP is excellent value for money for compatibility with 30 amp trailers.
Hughes Performance RV22050 Autoformer
Every RV deserves to have a trusted autoformer. This is to protect the devices from damage due to low voltage. If you want to extend the life of your RV devices, you need to hire the service of the best RV auto-former on the market: Hughes Performance RV22050 Autoformer.
The RV220-50 has all the same features as the previous RV220-50SP, but now includes advanced surge protection in the same housing. It’s fully automated and gives you a 10% boost when you need it. The RV220-50 also includes a pulse warning light and full LED parking power diagnostics. And it has 4800 joules of advanced protection built into the unit. This unit is also replaceable. Also, it is one of the few that has a proprietary surge solution in the United States. The RV220-50 also comes with a two-year limited warranty.
Packed with the reliability and performance Hughes is known for, the RV220-50 gives you the most advanced surge protection. This is an all-in-one power solution for your RV with a proprietary RV voltage amplifier. In the event that your RV has a massive power spike, this surge unit will absorb the blow keeping your thruster and RV safe from damage.
Frequently Asked Questions
What is an RV Autoformer?
An RV Self-Trainer can protect your RV and electronic equipment from damage caused by voltage fluctuations. Some of them can even protect your RV from high and low voltages and detect reverse polarity, open neutral, or open ground. Basically, this is an important device that can regulate the volt supply to practically any electrical device. It works by cutting off or blocking the power supply of a device and can prevent the power supply entering the device from exceeding a safe threshold.
The power system of a campground can be unpredictable, especially in an older trailer park. You will find that the electric poles are installed on a chain. So if there is a problem with one RV at some sites, it can affect other RVs connected to the same system. The power available in a system can fluctuate as people turn their devices on and off.
How does an autoformer work?
Many RV owners don’t understand how a self-trainer works. This is the reason why some of them have not yet installed this equipment in their RV. Simply put, an autoformer works by adjusting the tension that flows through your RV. Regulates the power output according to your actual power demand. If the electricity from the source is too low, the autoshaper raises it so that your devices work properly.
For example, some power outlet boxes in campgrounds send as little as 100 volts. However, VR devices generally operate at 110 volts. Because 100 volts is too low for such devices, they tend to overwork, trying to draw more current to get the desired voltage they need. This causes overheating and ultimately destroys the machine. An autoformer can prevent this from happening by accepting the low voltage and increasing it to the desired voltage of 110 volts or more. This prevents your devices from being damaged.